Provided tests in OFI-pts-2023:
The test procedures marked with A are included in the scope of accreditation.
| Tensile, flexural and impact properties of plastics | Schedule 1 | ||
| Tensile properties (modulus of elasticity in tension E) | A | ISO 527-2 | € 315 |
| Tensile properties (type 1A specimens; yield & break) | A | ISO 527-2 | € 345 |
| Injection moulding of specimens (type 1A) & tensile test | ISO 294-1 | € 375 | |
| Flexural properties | A | ISO 178 | € 345 |
| Charpy impact strength (1eU) at +23 °C | A | ISO 179-1 | € 315 |
| Charpy impact strength (1eU) at -20 °C | A | ISO 179-1 | € 315 |
| Izod Notched Impact Strength at +23°C | ISO 180 | € 375 | |
| Charpy notched impact strength (1eA) at +23 °C incl. specimen notching | A | ISO 179-1 | € 315 |
| Charpy notched impact strength (1eA) at -20 °C incl. specimen notching | A | ISO 179-1 | € 315 |
| Charpy notched impact strength (1fC) - double-V-notch - incl. notching | ISO 179-1 | € 375 | |
| Izod impact strength at +23 °C | ISO 180 | € 375 | |
| Creep modulus in tension at +23 °C: E(1min), E(1h), E(100h) | ISO 899-1 | € 345 | |
| Full-notch creep test (FNCT) | ISO 16770 | € 345 | |
| Hardness and abrasion resistance of plastics | Schedule 1 | ||
| Hardness: ball indentation | ISO 2039-1 | € 315 | |
| Shore D | A | ISO 868 | € 315 |
| Abrasion resistance ("Taber", i.e. wear by abrasive wheels) | ISO 9352 | € 375 | |
| Thermal properties, thermal analysis and dynamic mechanical properties | Schedule 1 | ||
| Coefficient of linear thermal expansion a und Tg (TMA) | ISO 11359-2 | € 315 | |
| Shear modulus from torsional vibration | ISO 6721-7 / ISO 6721-2 | € 315 | |
| Flexural vibration - Resonance-curve method (DMA) | ISO 6721-3 | € 345 | |
| Thermal analysis (DSC): glas transition temp. (Tg) | A | ISO 11357-2 | € 315 |
| Thermal analysis (DSC): OIT-value | A | ISO 11357-6 | € 315 |
| Oxidation induction temperature (dynamic OIT) | ISO 11357-6 | € 315 | |
| Thermal analysis (DSC): melting & crystallization behaviour | A | ISO 11357-3 | € 345 |
| Thermal analysis (TGA): carbon black content | A | ISO 11358-2 | € 315 |
| Vicat softening temperature | A | ISO 306 | € 315 |
| Temperature of deflection under load | A | ISO 75-2 | € 315 |
| Properties of plastics in molten state | Schedule 1 | ||
| Complex shear viscosity of polymer melt | ISO 6721-10 | € 345 | |
| Melt mass-flow rate (MFR) | A | ISO 1133 | € 315 |
| Optical properties | Schedule 1 | ||
| Colorimetry (colour coordinates + colour difference) | DIN 6176 | € 315 | |
| Specular gloss at 20°, 60° and 85° | ISO 2813 | € 315 | |
| Microscopy | Schedule 2 | ||
| Light microscopy analysis of layer structures | - - - | € 345 | |
| Semi-Quantitative analysis of elements by means of REM-EDX | ISO 22309 | € 345 | |
| Chemical and physic-chemical testing of plastics | Schedule 1 | ||
| Density of plastics | A | ISO 1183-1 | € 315 |
| Extractables in PVC | ISO 6427 | € 345 | |
| Determination of ash (0,1 % to 10 %) - procedure A | A | ISO 3451-1 | € 315 |
| Degree of cross-linking of PE-X | ISO 10147 | € 315 | |
| Viscosity of PET in dilute solution | ISO 1628-5 | € 345 | |
| Environmental exposure tests | Schedule 2 | ||
| Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps | ISO 4892-2 Verfahren A | € 375 | |
| Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps | ISO 4892-3 Zyklus 1 | € 375 | |
| Heat aging test on thermoplastic molded compounds, without external mechanical stress | DIN 53497 | € 345 | |
| Chemical resistance | - - - | € 345 | |
| Paints and varnishes |
Schedule 2 | ||
| Measurement of coating thickness -- Amplitude-sensitive eddy-current method | ISO 2360 | € 345 | |
| Measurement of coating thickness -- Magnetic method | ISO 2178 | € 345 | |
| Pull-off test for adhesion | ISO 4624 | € 345 | |
| Cross cut test | ISO 2409 | € 315 | |
| Assessment of degree of blistering | ISO 4628-2 | € 315 | |
| Scratch resistance of surfaces | DIN EN 15186 | € 345 | |
| Rubber (unvulcanized, vulcanized and fogging properties) | Schedule 1 | ||
| € 315 | |||
| Mooney viscosity of unvulcanized rubber | ISO 289-1 | € 315 | |
| Hardness: Shore A | A | ISO 48-4 | € 345 |
| Hardness: IRHD - method N - normal test | ISO 48-5 | € 315 | |
| Hardness: IRHD - method M - microtest | A | ISO 48-2 | € 315 |
| Compression set ISO 815 | ISO 815-1 | € 315 | |
| Density of rubber | A | ISO 2781 | € 315 |
| Tensile stress-strain properties | A | ISO 37 | € 345 |
| Tear strength, method A (trouser test Piece) | A | ISO 34-1 | € 315 |
| Tear strength, method B (angle test Piece) | A | ISO 34-1 | € 315 |
| Abrasion resistance using Taber abrader | ISO 5470-1 | € 315 | |
| Abrasion resistance using a rotating cylindrical drum device | ISO 4649 | € 315 | |
| Thin plastic films and other packaging materials | Schedule 1 | ||
| € 345 | |||
| Tensile properties of plastic films | ISO 527-3 | € 345 | |
| Tear test (trouser tear method) | ISO 6383-1 | € 345 | |
| T-peel test on flexible multilayer plastic films | ISO 11339 | € 345 | |
| Seal seam strength | EN 868-5 | € 345 | |
| Determination of the coefficients of friction | ISO 8295 | € 345 | |
| Determination of impact resistance by the free-falling dart method | ISO 7765-1 | € 345 | |
| Film thickness by mechanical scanning | ISO 4593 | € 345 | |
| Water vapour transmission rate | ISO 15106-2 | € 345 | |
| Overall migration - Iso-Octan | EN 1186-3 | € 345 | |
| Overall migration into 3% acetic acid | EN 1186-3 | € 345 | |
| Overall migration into 95% ethanol | EN 1186-14 | € 345 | |
| Overall migration into Tenax® | EN 1186-13 | € 345 | |
| Plastic sheets for waterproofing | Schedule 2 | ||
| € 315 | |||
| Flexible sheets for waterproofing - Tensile properties | EN 12311-2 | € 315 | |
| Resistance to tearing | EN 12310-2 | € 315 | |
| Resistance to tearing (nail shank) | EN 12310-1 | € 315 | |
| Resistance to impact | EN 12691 | € 315 | |
| Peel resistance of joints | EN 12316-2 | € 315 | |
| Dimensional stability | EN 1107-2 | € 315 | |
| Static puncture test (CBR-test) for PEHD-sealing sheeting | EN ISO 12236 | € 315 | |
| Determination of thickness and mass per unit area | EN 1849-2 | € 315 | |
| Plastic pipes and drinking water after contact with Plastics | Schedule 2 | ||
| Polyolefin pipes - tensile properties | ISO 6259-3 | € 345 | |
| Thermoplastic pipes - ring stiffness | ISO 9969 | € 345 | |
| Thermoplastics pipes - longitudinal reversion | ISO 2505 | € 345 | |
| Thermoplastics pipes - creep ratio | ISO 9967 | € 345 | |
| Creep modulus in tension on samples taken from pipes – creep-modulus E1min, E1h, E24h at 23°C | in Anlehnung an ISO 899-1 | € 345 | |
| Determination of dimensions | ISO 3126 | € 345 | |
| Thermoplastic pipes: Resistance to external blows - staircase method | ISO 11173 | € 345 | |
| Thermoplastic pipes: Resistance to external blows - round-the-clock method | ISO 3127 | € 345 | |
| Internal pressure test - time to rupture at 20°C | ISO 1167-1 / ISO 1167-2 | € 345 | |
| Internal pressure test - time to rupture at 95°C | ISO 1167-1 / ISO 1167-2 | € 345 | |
| Degree of pigment or carbon black Dispersion | ISO 18553 | € 345 | |
| Determination of chlorine content of PVC-pipe | ISO 1158 | € 345 | |
| Test of flow resistance using water as test fluid | EN 1267 | € 345 | |
| Differential scanning calorimetry (DSC) method - Measurement of the enthalpy of fusion of crystallites | ISO 18373-2 | € 345 | |
| Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the processing temperature | ISO 18373-1 | € 345 | |
| Pipes made of PVC-U - Restistance against Dichloromethan - Rating of damage | ISO 9852 | € 345 | |
| Geotextiles and geosynthetics | Schedule 1 | ||
| Thickness at specified pressures | ISO 9863-1 | € 315 | |
| Characteristic opening size | ISO 12956 | € 315 | |
| Wide-width tensile test | ISO 10319 | € 345 | |
| Static puncture test (CBR-test) | ISO 12236 | € 345 | |
| Water permeation characteristics normal to the plane, without load | ISO 11058 | € 345 | |
| Dynamic perforation test (cone drop test) | ISO 13433 | € 345 | |
| Pyramid puncture resistance | EN 14574 | € 345 | |
| Mass per unit area | ISO 9864 | € 315 | |
| Protection efficiency against impact damage | ISO 13428 | € 345 | |
| Tensile strength of nonwovens | EN 29073-3 | € 345 | |
| Weathering (EN 12224) with following tensile test (EN 29073-3) | EN 12224 / EN 29073-3 | € 345 | |
| Determination of burst strength | EN 14151 | € 345 | |
| Rigid cellular plastics and sound insulation materials | Schedule 2 | ||
| Compression behaviour | EN 826 | € 345 | |
| Dynamic stiffness | ISO 9052-1 | € 375 | |
| Dimensional stability under specified temp. and humidit conditions | EN 1604 | € 345 | |
| Tensile strength parallel to faces | EN 1607 | € 345 | |
| Short term water absorption by partial immersion | EN ISO 29767 | € 345 | |
| Heat of combustion (mineral wool) | ISO 1716 | € 345 | |
| Thermal insulating products for building applications ― Determination of the apparent density | EN 1602 | € 315 | |
| Determination of compressive creep | EN 1606 | € 375 | |
| Acoustics - Materials for acoustical applications - Determination of airflow resistance | ISO 9053 | € 375 | |
| Determination of water vapour transmission properties | EN 12086 | € 345 | |
| Sports surface properties | Schedule 2 | ||
| Determination of vertical ball behaviour | EN 12235 | € 345 | |
| Determination of vertical deformation | EN 14809 | € 345 | |
| Determination of shock absorption | EN 14808 | € 345 | |
| Slip resistance | EN 13036-4 / EN16837 | € 345 | |
| Tensile properties of synthetic sports surfaces | EN 12230 | € 345 | |
| Thickness | EN 1969 | € 315 | |
| Determination of critical fall height | EN 1177 | € 345 | |
| Determination of abrasion resistance of sports surface | ISO 5470-1 | € 345 | |
| Determination of rotational friction | EN 14903 | € 345 | |
| AAA Methode | CEN/TS 16717 | € 375 | |
| Angled ball behaviour, Tennis | EN 13865 | € 345 | |
| Determination of rotational resistance | EN 15301-1 | € 345 | |
| Determination of particle size – sieving method | EN 933-1 | € 345 | |
| Adhesive Tests | Schedule 2 | ||
| Determination of peel resistance of adhesive bonds - Floating roller method | EN 1464 | € 345 | |
| Determination of tensile lap-shear strength of bonded assemblies | EN 1465 | € 345 | |
